STEP Drill bit
now browsing by tag
My new plan is to work one more year at school and then next summer (if not before) hit the ground running and go back to doing what I love best: creating. Before I get too old! To that end, I am moving heaven and earth to get the house around me organized and in good working order which involves many, many tasks. This is the tale of one of those tasks.
It all started with my garbage disposal. I wish I had a better picture, because it was spectacular. COMPLETELY rusted away from the sink above, and was only held up by a few old plastic bottles of cleaner. Just look at it! For that reason, I avoided “under the sink” forever, and just used the one side. When I got a home improvement loan, I was finally able to have the whole thing removed and turned back into regular plumbing.
Now that that was fixed, I really wanted a Reverse Osmosis drinking water system. Reverse osmosis turns your tap water into something akin to bottled water. No messing with five-gallon containers or endless little plastic bottles! It’s a little expensive to begin with. $700 to $1000 to have it installed, but I discovered I could buy a system and do it myself for $300. Score!
Once the scary disposal was gone, I gritted my teeth, put on some rubber gloves, and emptied everything out from under the sink, including an old mouse trap. Gulp! I channeled my mom, who faced this sort of task with grim determination.
After I bleached and scrubbed and bleached again, I put some linoleum tiles down. Much better! The plumber accidentally left that cord in the upper right behind. Even plumbers make mistakes!
My new system finally arrived. I have zero knowledge of plumbing so I studied the instructions backwards and forwards and bought the required tools, a 1/4″ and a 1/2″ drill bit, and I skimmed through a video or two. Finally, I was ready to go. I would install the system, have lunch, and take a nap.
The first thing I had to do was drill a new hole in my kitchen sink for the faucet that would dispense my water. It turns out, old stainless steel sinks are really tough, and the faster you drill, the harder the steel gets. The sink was smoking, the drill was smoking, I burned my fingers.
I finally found out I needed a special drill bit, one I’ve never heard of or seen before. It’s called a Step drill bit. It’s gold, because it costs a lot of money. And I’ll only use it once! But needs must, as they say in jolly olde England.
Surely that would be the hardest part, and it would be smooth sailing from there. Wrong! There were so many other stops and starts. Throughout installation there were equal parts swearing and praying, one loud and the other soft. More than once I decided to give up and call a plumber in the morning. But then morning came and I would try, try again.
Finally, I finished. It was time to turn the spigot. I now know what they mean by, “Water, water everywhere, and not a drop to drink!”
It was leaking all over the place! I almost cried and probably would have, if I hadn’t already sweated all the moisture out of my body. I finally figured out I hadn’t pushed the tubes into the “quick connect” joists firmly enough. One last trial. I redid the joints and held my breath.
This little project ended up taking THREE DAYS. But I learned a lot. And it’s done! I did it! I didn’t give up! And less the $100 I spent on tools, I still saved $300. That’s $100 bucks a day! Would I call a plumber if I had it to do over again? I’LL NEVER TELL.
My next major project – after a complete overhaul of my downstairs bathroom – is my sewing room. You think my disposal looked bad? Wait until you see the room where all the magic happens! I’ve filmed the “before” and am going to make a video post. VERY FEW have ever been in there. Few would dare! COMING SOON.
With that, I leave you! Need a hole drilled in your sink? I’m your girl! You know why? Because I’ve got the bit, and You’re My Favorite!